A60, ST64 light bulbs

You are here:
A60 lightbulb
A60 lightbulb

IMPORTANT!

This lighbulb only supports quick pairing.

Pairing

To start the quick pairing mode you need to turn the lightbulb off and on 3 times. In this way it should work:

  • Turn the power to the lightbulb off.
  • Turn it on after 3 seconds.
  • Turn it on for 2 seconds (1st time).
  • Turn it off for 2 seconds.
  • Turn it on for 2 seconds (2nd time).
  • Turn it off for 2 seconds.
  • Turn it on (3rd time) and leave it on.

I didn’t measure the time of the following process but please wait aproximate 30 to 60 seconds to complete:

  • After a few seconds the lightbulb will turn the light to full brightness.
  • A few seconds later the lightbulb will blink rapidly.

When the lightbulb blinks rapidly you can start the Quick Pairing in the eWeLink app.

Remember that this only works with 2.4 GHz WiFi networks! When you have issues with pairing be advised to temporarily disable 5 GHz or be a t least assured you are connected with a 2.4 GHz network!

< Previous My device didn’t came with a manual or the manual is unclear. Where can I find clear instructions?
Table of Contents

Contact

In case you think there is an error in a Knowledge Base article, there is something missing or when you have an idea for a new Knowledge Base article please contact us on our Contact form!

If you refer to an existing Knowledge Base article please include the link to the article involved!