On the latest iOS version (approximate iOS 15.2) you may experience that you are unable to pair new WiFi enabled devices because the feild for… Read More »iOS: Network name not prefilled during pairing, unable to send feedback and view in-app documentation
Sometimes you experience issues while pairing. Most times they end with an error code. Most people don’t notice these important error codes and just find… Read More »Error codes during pairing of a device
The manual of the eWeLink thermostat (like the KKMOON HC-T010-EWF and simular ones) describes that the thermostat just goes in pairing mode directly after powering… Read More »Pairing the eWeLink thermostat (KKMOON HC-T010-EWF and simular ones)
Adding your eWeLink devices to SmartThings is based on device types. You add devices of the same type all at once. Once you added the… Read More »How to add eWeLink devices to Samsung SmartThings?
Touch switches can be handy to automate your existing ceiling lights. Sometimes those touch switches need to be paired again. E.g. when you changed your… Read More »While pairing my touch switch it doesn’t respond to the button press!
Pairing Some users report issues with pairing a eWeLink supported WiFi doorsensor or Sonoff L2 LED strip. Mostly the device can not be found on… Read More »WiFi doorsensors & LED strip won’t pair
eWeLink supported devices do mostly work on 2.4 GHz networks (802.11 b/g/n, WiFi 4). Nowadays a lot of accesspoints combine 2.4 GHz and 5 GHz… Read More »I have 2.4 GHz and 5 GHz WiFi networks. Does this affect the working of eWeLink supported devices?
Pairing To start the quick pairing mode you need to turn the lightbulb off and on 3 times. In this way it should work: Turn… Read More »A60, ST64 light bulbs
First of all: be sure that you are only connected to WiFi. If you have cellular data enabled or have enabled automatic switching between cellular… Read More »Pairing of my eWeLink supported device seems to fail. What should I do?
